Doug pc download

No more re-writing the SD card every time a change is made. Once installed future updates will be as easy as a single keystroke. This will include kernel and security updates. Please see the readme file for the V1. We highly recommend the RPi3 for any future purchases.

Future code will support both the RPi2 and RPi3. Note that the RPi2 does not have on-board wifi or bluetooth support and the RPi3 has better performance specs. The BeagleBone Black will be supported for security and bug fixes and may have a release for additional features but users should consider phasing out the BBB at some point in the future. The RPi3 can run a non-radio hub or a dual radio node easily. Think of it, you could save enough in a year retiring a power guzzling PC to buy several RPi2's and have some leftover cash.

These are the current releases in the download section: BBB V1. Please upgrade to the Raspberry Pi for all the great new features. RPi V1. See the Download link below for more detailed information on the releases. We hope you will like the latest hamvoip V1. This is a volunteer effort and sometimes things get delayed.

You can also do an archive search of the arm-allstar forum at hamvoip-search. The best answer is open source, quality audio, and freedom to do what you want. Dstar, Fusion, DMR, etc are all at least partially if not completely proprietary systems. Code plugs, Rooms, etc. It also makes a system which is managed much like IRLP. The individual users has little control other than to connect somewhere.

Then there is the lousy audio that goes along with the current Amateur Radio digital RF schemes. Allstar connects RF systems with full duplex quality audio. It also gives the user a choice in how and where they connect. Private or public group or individual connections can be setup quite easily. If you are in a restricted living environment like a retirement home or HOA that does not allow antennas Allstar gives you the radio feel without an obtrusive antenna or big expense.

You could setup a simplex node in your apartment or dwelling and have local coverage with in a few blocks to several miles between your handheld and you own personal node.

Couple that with the ability to setup connections to all your buddies that also have nodes and you have your own talk group with everyone using real radios to access. You also have the ability to access via computer, phone, Echolink, and many other methods. The advent of the inexpensive small board computers and very easy scripted setup make getting on Allstar easier than ever. For repeater operators Allstar is a complete repeater controller that probably has more flexibility and capability than any repeater controller on the market.

It is certainly cheaper. Because it runs in Linux and is open source the user has full flexibility to use scripts, timers, multiple ports, etc. So if you like to call your own shots come join the friendly world of Allstar. You will be surprised how easy it is to get started and a world of adventure awaits you.

Ever since the Raspberry Pi was introduced over two years ago it has been the goal of many to make Asterisk Allstar work on that platform. Over the years there have been several attempts which fell short.

In January, I decided to give it another try. I thought I had it but unfortunately it did not provide the kind of performance you would expect for Allstar.

It worked fairly well audio wise in USB 1. Both versions worked fine but Saucy required a kernel recompile to include the OSS sound code. So I moved to the BeagleBone Black. My first attempt used Debian and the results were better than on the RPi but the DAC the side that converts what you hear on your end audio was not good.

I finally decided to try Archlinux. Archlinux is a leading edge barebones linux that comes with very little add-on stuff.

No graphics or packages that would not ordinarily be needed are part of the virgin installation. While it is not a "hold your hand" Linux it was surprisingly easy to compile and get Allstar running.

Maybe it was all the experience I had working at this for months before that made it seem easier but in any event I was tremendously surprised that it worked. I had almost given up on ARM Allstar working and I could hardly believe my ears that it was working so well.

It is hard to explain why as the basic kernel is the same. CPU utilization was at least half what it had been on the Debian releases. The first release was a success although still early in the Linux kernel development for the ARM processor. This lead to some minor USB issues but overall the project was widely accepted. Throughout the summer of we worked on improvements and with a later kernel release and many scripts to simplify installation a second release came in October We are very proud of this release and its impact on Asterisk Allstar in the amateur radio community.

In early the release of several new ARM processor boards sparked our interest. We did research and testing on the Odroid C1 and the Raspberry Pi 2. Both boards have four core processors and much improved performance over the older Raspberry Pi and Beagle Bone boards. Although the Odroid C1 is technically a better board than the RPi2 we decided that the RPi2 was a better choice from an availability and support standpoint.

The first thing you should do is visit the allstarlink. Once you register you can become a node sysop by checking a box in the profile tab.

You then establish a server "on paper" in a very simple fashion. Once you have done that you can request a node number which should be issued within 24 hours. You should get a response email when the node is assigned but you can also revisit the allstarlink. When the node is assigned a 6 digit password for that node is also assigned. You will then use those two numbers to setup your local Allstar node as described below.

While you are waiting for your node number you can get the hardware you need on order and review the setup instructions on this page and in the Howto's at hamvoip. You can also Download the image and write it to your SD card. Any new purchases should use the Raspberry Pi 3 and the V1. Eventually you will also need a power supply preferably supplying A 5V inserted at the barrel power connector on the BBB board.

The RPi wiki has an extensive list of hubs tested on the RPi. I suspect the same would hold true for the BBB. It would be good to reference it before buying a hub. A powered hub would not always be necessary but it would not hurt to have one.

RPi list of acceptable and not acceptable powered USB hubs. It seems to work fairly well. I ran it for several days on two busy nodes.

At times both were operational and I noticed no problems. Further testing is necessary. I think two is the limit though. This does not come with the board. It is also a good idea to also order a case for your board. The image file is sized to go on a 4GB microSD card as a minimum. The compressed image zip file is just over M. It is strongly suggested to use an 8 or 16G card. The larger the usable area on the card the more space there is for wear levelling.

This will reduce the number of writes to any one location on the card and greatly extend its life. I have instituted as much write to RAM in this package as possible so there are very few writes to the SD card. After several years of experience with these cards we find them to be very reliable.

However they can eventually fail so a backup is always very important. Backing up an SD card image once you have it configured the way you want it is as easy as reading the image into your computer using Linux 'dd' or Windows 'win32diskimager'. You MUST use an image copy method. You cannot just copy files to make an image backup of the SD card.

This is not something that would happen very often but it is always good to be prepared. Starting at BBB version 1. We also do not recommend expanding the partition size to the full SD card size unless you have a real reason to do that.

It does nothing for reliability and makes it difficult to do image backups as the entire card must be backed up and restored. The image uses Archlinux. Archlinux uses systemd for loading modules, maintaining logs, and lots of other things.

It is totally different than the initscrpt you have used in many other Linux distros. I am including some links that will help you with that but for the most part after you get your image configured it is plug and play. The image file must be downloaded and written to a microSD card. This can be done on a Windows or Linux PC.

If you are using Windows and win32diskimager the procedure is to first unzip the downloaded file. You should then have the image. Then insert the card in your reader, start the win32diskimager program, select the file you downloaded and then select write.

Note that after installing win32diskimager and starting for the first time you may get an error about elevating permission levels or something like that. If you do, exit out and left click once to select the win32diskimager icon, then right click and select "run as administrator" It should then run properly. See details on how to use win32diskimager here or at this site.

One of the sites gives an example using the Raspberry Pi. It takes anywhere from minutes to write the card depending on the image size and your systems speed. Then do a 'df' to determine the device name. It is important to identify the device properly. You do not want to write to your hard drive!! Once you have identified the device use 'dd' to write the image. Starting with the RPi V1. Simply running the 'exe' file in Windows will produce the.

In Linux when using the xz file this can be done in one line with xzcat. Here is an example -. Replace sdX with the device name of the SD card installed in the writer.

It will also develop and markets high-quality CS games for PC players, as well as next-generation and Macs. In this game, two opposite groups, are called protesters and terrorists. And to achieve goals such as rescue or arrest.

Players also get awards at the end of every round if they give a good performance. However, unified rounds give you more money.

It also pays you a bonus to achieve goals such as killing enemies. Lack of support can lead to punishment for killing the party. The player can also purchase guns in it. These guys have their unique abilities. Moreover, the ignition switch caused some damage. The generator temporarily installed a smoke detector. A steam bomb simulator is a necessary tool for the player. Now the brilliant Flashbang players were watching as it exploded, and cocktails and Molotov cocktails made up a small part of the list for a short time.

The player can also purchase a newly launched gun Zeus x As I said, there are a few things I can keep writing about how much I love this app. This app is one of the best apps on my phone and I highly criticize the app reviews. There is only one request so please allow me to disable camera sound in settings.

Just like you can disable the sound when you take a picture in an app like Snapchat. The only way to get rid of the noise the camera makes is to turn off the bell. Because I use the camera a lot, the sound is annoying, so I have no choice but to turn off the bell. The problem is that it has already happened to me that I forgot to turn the phone back on and missed or lost a few important calls when making calls.

Doing so could save lives. Notification preview update. Thank you. I would be very grateful if anything is done. I really like WhatsApp. I first started using it when my brother and I were traveling out of town, and we wanted to be in daily contact with our family back home to let them know if we were okay. I fell in love right away. I love the fact that you can send texts, calls and photos for free no matter where you are in the world.

One of the things I like the most is that you can send a lot of photos at once, but there are limits to regular texting. WhatsApp you need to fix your security ive been getting hacked non stop.

They started to call me now to steal my personal information and leave voicemails to see if I fall for their tricks. Please make it stop this is getting annoying and is very inconvenient for me to have to reset this and my password every single day.

Still not syncing contacts since iOS update months ago When IOS updated several months ago, one of the features that was affected on WhatsApp was the option to sync contacts. I called Apple then and they informed me that each app provider must update their security profiles to be compatible with the new IOS.